|
|
XymphonyFirmwareHistoryVersion 250108 1. Main page Users/Multiple wake-up link added. Reminder activation (wake-up calls) can be entered for subscribers in bulk. Enter multi wakeup for users. The format of this field is shown below: Reminder time/Non recursive | HH | MM | where; HH is hours MM is minutes of the wake-up time. If the non-recursive checkbox [] is marked then the reminder service operates once. If it is unmarked then the reminder service operates everyday at HH:MM. To cancel the wake-up call, select the users whose wake-up call you want to cancel without entering the hour and minute and press the ok button. Upon arrival of the reminder time, system will alert (call) the user and play system voice message 7. 2. Half time time zones added to the Time zone list box Version 240726 1. WebCM protocol has been added to the CMDR protocol list box. This allows Xymphony to also send call recording information to Xtools, Fidelio or WebCM. 2. Easy programming Xymphony operating system programming is provided with Xymple program. You can program Xymphony operating system via web server or with Xymple. Version 240612 1. KMT subscriber feature added for Karel Mobil Softphone 2. Call forwarding (moved temp) feature from IP Phone is provided 3. Auto provision support provided for Fanvil X3SP IP phone Version 240109 1. Auto provision support provided for Fanvil IPT241P, IPT251G and IPT261G IP phones 2. Auto provision support provided for Yealink IP310P, IP311P and IP313P IP phones Version 221013 Added Unlimited conference room checkbox to system settings page, If check box mark, removes the time limit (for subscribers) in the conference room. Version 220222 Hybrid (Two digital, four analog trunk lines, 6 analog subscribers) card supported Version 210621 Increased the Xymphony Disk full alarm status from 12.5% to 25%. Version 201015 Always media proxy checkbox has been added to the common properties page of the sip port. When the checkbox is marked, media always uses the proxy for incoming and outgoing calls from the relevant sip port and transmits the voice packets using exchange media channels. Version 200917 Added * to valid characters (ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789 / - +.) In the Port's User ID and Auth.ID field Version 200901 A list box for the + sign has been added to the A-Party analysis table to add a + sign to the beginning of the caller number in the A-Party analysis table. Version 200801 Ethernet / SIP Basic SIP voip settings page has added Sip UDP source signaling port text box. Sip UDP/TCP request source port and Sip TCP/UDP signalling port text boxes can be changed in PX24 xrX when switch eight is in the off position. Sip UDP request source port supplies source port number for requests sent to register to remote servers. Version 200707 1. The message recording time has been increased from 10 minutes to 15 minutes. 2. In the Autoattedant table, route camp messages has been increased from 1-5 to 1-9. If the position of the call in campon queue is between 1-9, relevant message is played else RouteCmp msg. * is played. Version 200627 1. LDAPS check box is added in basic ethernet settings page. When the checkbox is marked, the Secure Ldap protocol is used. 2. If calls from analog trunk lines and If an subscriber did not enter the conference room, the conference duration is defined for 10 minutes of the analog trunk lines. If there is an subscriber, the time limit is not applied. Version 200611 Call pickup group table has been increased from 15 to 99. Applicable to local subscribers. Groups of 1-99 are valid. Upon execution of law actionCall pickup of pickup group (default 817), members of the same pickup group is scanned to pick up the call. Link can be used to download lists of pickup group members. Press Edit to view the group members. Version 200601 Network status is added Status / Info Runtime status page. It shows the number of times the network connection is up / down, the date and time at which the network connection was up and the network connection speed. Version 200115 REGISTER message as keepalive checkbox is added common properties of sip. If the checkbox is marked, register messages are sent more frequently to keep ip connection alive. Version 200111 Default gateway LAN ip address checkbox is added Basic ethernet settings. Can be used if the system is operating behind a NAT. Whenever Xymphony sends a message declaring self IP address to a (lan) local address not inside the same subnet, if an address is defined here it will be used in place of IP address defined above. Version 191221 1. Ping daemon is added in Ethernet basic settings. Type ip address in the text box and press the Test button Accessibility of IP entities can be checked by sending ping messages 2. Display name is displayed instead of Account name on the Select user page. Version 191116 Enable call transfer warning is added common properties page. Mark this checkbox to enable the warning beep tone insertion when a call is transferred to this user. Version 191113 When the voice mail message is left in the ip phone, Xymphony sends notify message to voicemail. Version 191111 Auto dialing and call back features period reduced from 2 minutes to 45 sec. Version 191015 1. The Display name field of the port's Account properties page has been increased to 34 characters. Valid characters are "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789. + / 2. The Comment field on the Port's Common properties page has been increased to 31 characters. Valid characters are "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789. + /. 3. The Display name link is added to the common properties page of the port. When the link is clicked, the opened page contains 3 fields separated by commas. On the left side is the access code of the port, the display name, the comment. Version 190825 Use asserted id in SIP requests check box is added in common properties of sip port. If the checkbox is marked, "From" field content is repeated for "P-Asserted-Identitiy" field. If a different text is needed then the a party analysis table number should be entered to A party analysis of asserted id field. Version 190823 Increased the number of password characters of SIP, xSip to 23 Version 190818 The Default gateway public IP address text box is added to the Basic ethernet settings page. Text box is active when the Declare external IP address check box is marked. Xymphony detects the public ip address of the exchange in three different ways. 1. It uses the default gateway on the Basic Ethernet settings page to access the ip address written on the DNS server and learn the public ip address from checkip.dyndns.org. 2. It asks the public ip address to the Xymphony operating system, which is registered to other Xymphony. 3. It asks other AU which is located to WAN If Xymphony cannot detect the public ip address from the 3 items above, it starts using the ip address that is written in the Default gateway public IPaddres text box as the external ip address. Version 190805 The Display name and User id text boxes are added to the Account properties page of the port. When TELESIS digital phone is called, this field is displayed to the called user. |