|
|
XymphonyProgramming-ResetTheIntegratedWEBServerParametersAssume that you have programmed the system by editing many parameters including web server settings and saved these. For any reason, Login ID, password and HTTP port number have been forgotten and it is not possible to reconnect to the web server of the system. The requirement is to reconnect to the system (or reset the web server settings) without loosing any other parameters, which are previously set. First step is to restart the system with factory default settings (see below internal links). When the system starts up, the factory default IP address of the system is member number of AU (assume that if dip switches is set member number 7 ip address is 10.0.0.7) and the port address is 80. Connect to the system with a web browser. Operate the  Important: Never operate Next step is to Reboot (or power down and up) the system. In order order to reboot the system, click on Then the system starts up with all the parameters, which are previously programmed, but define new login id and password again from the Web Server button. Note:Ask your exchange administrator to define a strong (not easy to guess) password for the web interface. For safety considerations, please look the following link Safety considerations Internal Links |